0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Replacement Vaporesso ECO Nano Pods have a great built-in mesh coil that features Vaporesso’s impressive Corex Heating Technology that increases longevity by up to 50%! Corex also adds to flavour production that brings out the best in your favourite e-liquid. Each pod has a 2ml capacity which is replenished via the bottom-fill port which is covered […]
The 20A-40A rating indicates the maximum safe continuous discharge rate for the battery. It is important to use a battery that matches the requirements of your device to ensure safety and prolong the battery’s lifespan. As with all rechargeable batteries
The best coils for this tank series are these genuine Geek Vape MeshMellow Coils for the Alpha Sub-Ohm Tank. These MeshMellow replacement coils are made of Kanthal and come in a 3-pack. They have Egyptian Organic Cotton wicking materials that were imported. The taste, vapor, and coil longevity have all been improved with the Geek Vape MeshMellow coils. For 60W to 110W, the 0.2-ohm X1 Single Mesh Coil is rated.
The Innokin Plex3D iSub Coils are compatible with the Innokin DV pod system kit and the iSub-B 2ml Tank. The Plex3D design contains “Micro-Grooves” and employs organic cotton and wood pulp wicking for improved flavor absorption from your e-liquid. It uses 3D Mesh Coil Technology. The Plex3D Coils have a recommended wattage range of 30 to 55W and include quick heat-up and cool-down times, which significantly increase coil life.
These are replacement coils for the Innokin iClear 20D clearomiser that was first shipped with the EZ.TC Starter Kit. These 316L, stainless steel coils can be used in Wattage mode, however, they are specially optimized for temperature-controlled vaping. You may swap out the coil heads for the iClear 20D as well without draining the e-liquid from the clearomiser. Coils for the iClear 20D are available with a 0.5 Ohm resistance.
The Aspire Flexus Blok Vape Kit is a small and lightweight vaporizer. It has a modern, ergonomic design and a 1000mAh battery that is already inside. The system is made to work with Aspire Flexus Blok Replacement Pods, which have a built-in coil and a 2ml e-liquid capacity.
Select at least 2 products
to compare
Reviews
There are no reviews yet.