0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
With the stylish Innokin JEM vape pen, mouth-to-lung users can adjust their vape wattage between 10 and 13.5 Ohms. These five replacement Innokin JEM coils, each measuring 1.6 ohm, are top-notch in terms of their mouth-to-lung performance and durability. These low-power coils include many e-juice wicking ports on the stainless-steel barrel, just like the sub-ohm coils used with high-wattage mods.
Finic YC Replacement Coils are high performing atomizers for your Finic AiO 16 and 20 Device. Five YC coils are included in each pack, which comes in three different resistance options. Direct to Lung: YC-R1 0.6-ohm, Mouth to Lung: YC-R2 1.2 ohm, and Mouth to Lung: YC-C 1.8 ohm
The best coils for this tank series are these genuine Geek Vape MeshMellow Coils for the Alpha Sub-Ohm Tank. These MeshMellow replacement coils are made of Kanthal and come in a 3-pack. They have Egyptian Organic Cotton wicking materials that were imported. The taste, vapor, and coil longevity have all been improved with the Geek Vape MeshMellow coils. For 60W to 110W, the 0.2-ohm X1 Single Mesh Coil is rated.
The Geek vape A Series coils are suitable for the Geek vape Z MTL tank only. Never forget to prime fresh coils. Install the coil, add a few drops of vape juice, and wait five minutes before using. By doing this, you may prevent dry hits and coil burning by making sure the coil is wet.
Bubblegum Lollies 50-50 vape juice is designed to mimic the sweet and fruity flavour of a bubblegum lollipop. It has a sweet and sugary taste with a hint of fruitiness and is a blend of bubblegum and lollipop flavour.
Geekvape M100 Aegis 100W Starter Kit includes both the M100 mod and the Cerberus sub-ohm tank. The M100 mod is powered by a single 18650 battery (not included) and has a maximum output of 100 watts. It is also water, dust and shock resistant, making it a durable and reliable device. The Cerberus tank has a capacity of 2ml and is compatible with the Super Mesh coils, which are designed to deliver a great flavour and vapour production
Select at least 2 products
to compare
Reviews
There are no reviews yet.