0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Butterscotch Tobacco 50-50 is a e-liquid or vape juice that is frequently utilized in electronic cigarettes. Butterscotch Tobacco 50-50by Moreish Puff is a typically incorporates tobacco and butterscotch flavors in a 50/50 ratio. This flavor’s popularity can fluctuate based on individual preference.
The MTX Coils by Vaporesso are a range of Mouth To Lung coils with industry-leading mesh technology which produces maximum flavour and makes the coils last even longer. We recommend using 50/50 e-liquids with these coils for peak MTL performance due to the small size of the coil and vaporising ability. When fitting the coil, […]
These coils by TECC are small plug-and-play coils which are super easy to install and provide an amazing flavour experience for those looking for a Mouth To Lung, Restricted Direct To Lung or Direct To Lung Experience. TECC GTL Coils come in 3 different resistance so be sure to check out the table below to […]
The Smok TFV18 Mini Meshed Coils are compatible with the Smok TFV18 Mini Tank. They are designed with a large mesh heating area and provide three options for you to choose from, all for DTL (direct-to-lung) vaping. Each coil has a different mesh arrangement and so they provide slightly different experiences. See the table below to find the best-suited […]
The Innokin Endura T18 II Prism is a cute small tank with lots of power. Both the new T18 II and the Endura T18 E are compatible with the Prism. A 1.5-ohm coil transforms your liquid into delectable vapour that is surprisingly thick for such a sleek classic-style kit. Please be aware that only the T18 E coils—which come in a variety of resistances to fit your personal vaping style—will function with this tank.
The VooPoo PnP Pod Tank can flexibly switch between from being a pod to a vape tank. Compatible with the full range of VooPoo PnP coils as well as their RBA version, the PNP Tank has a magnetic base that sits perfectly in both the VooPoo Drag S and Drag X Kits. With the 510 base the PnP Pod tank […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.