z-force-tank-1687802998.png
https://vapelabuk.com/wp-content/uploads/2025/01/z-force-tank-1-1687803015.png
https://vapelabuk.com/wp-content/uploads/2025/01/z-force-tank-2-1687803015.png
https://vapelabuk.com/wp-content/uploads/2025/01/z-force-tank-3-1687803016.png

Z Force Tank

£16.99

The Innokin Z Force is a 2ml vape tank that provides flavourful, cloud-filled vaping and can be tailored between Direct-Lung and restricted Direct-Lung thanks to precise airflow control.

Description

The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.

Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.

The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.

For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.

 

Contents:

1x Z Force Tank (ZF 0.2? KAL Coil Installed)

1x Spare ZF 0.3? DTL Coil

1x Spare Clear Bubble Tube (5ml)

1x Spare Z Force O-Rings Set

1x Quick Start Guide

 

Features and Specifications:

 

1 Dimensions: 28.0*49.5
2 Capacity: 5ml
3 Coil: 0.3ohm 30-45W / 0.2ohm 50-80W
4 Coil Material: KAL
5 Vape Type: Slide Top Fill
6 DuoPrime Mesh Wicking T18E Coils
7 Leak-Proof Design
8 510 Thread
9 810 Drip Tip
10 Replaceable Glass
11 The all-new Z Force DTL Tank
12 Quick Top-Fill, 5ml E-liquid Capacity
13 E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid.
14 ZF Coils with DuoPrime Wicking

Reviews

There are no reviews yet.

Be the first to review “Z Force Tank”

Your email address will not be published. Required fields are marked *

1 x EFEST IMR 18650 Rechargeable Battery

1 x EFEST IMR 18650 Rechargeable Battery

Efest IMR 18650 rechargeable battery is a battery that is commonly used in high-drain devices such as electronic cigarettes, flashlights, and power tools. The 18650 battery size refers to the physical dimensions of the battery (18mm x 65mm). This battery has a high capacity of 3000mAh and a high discharge rate of 20A

I4 IntelliCharger

I4 IntelliCharger

The Nitecore I4 IntelliCharger is a four-bay battery charger that can charge multiple types of batteries, including Li-ion, Ni-MH, and Ni-Cd. It features an intelligent charging system that automatically detects the type of battery and applies the appropriate charging mode

£17.99
Frenzy NS TC Replacement Coil

Frenzy NS TC Replacement Coil

The Geek vape Frenzy NS replacement coils are for use with the Geek vape Frenzy Pod kit only. The NS coil family, known for unadulterated flavor, includes these coils. We advise utilizing high VG e-liquids of 70% and higher for the 0.7 Ohm coil due to the various resistances, but the 1.2 Ohm coil is better suited for high PG e-liquids of 50% and above as well as nicotine salts for a smooth throat hit.

Uwell Caliburn G3 Replacement Pods

Uwell Caliburn G3 Replacement Pods

Uwell’s Caliburn G3 Pods are available in two different resistances and come in boxes of 4. Only compatible with the Caliburn G3 Kit as they work hand in hand with the technology within the kit. Each pod features a built-in mesh coil which has been developed by Uwell to produce even more flavour and a better […]

£12.99
Aspire TSX Replacement Pods

Aspire TSX Replacement Pods

Aspire TSX Pods are a great range of mesh coil pods which are compatible with the Cyber range of Aspire Kits. The built-in mesh coils come in 2 different resistances so that you have the option to choose your preferred one. See the table below to find out which one may suit you best. Refilling […]