0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
It is advised to use Geek Vape Framed Staple F202 2-in-1 premade coils with a variety of rebuildable atomizers, including RDAs, RTAs, and RDTAs. Only experienced vapers are advised to use these coils. Each kit contains two different kinds of vape coils: a 0.25 Ohm Framed Staple Fused Clapton and a 0.2 Ohm Framed Staple Twisted.
The Zenith II Tank is an e-liquid vape tank. It is an updated version of the original Zenith Tank from Innokin. It has a 4ml e-liquid capacity and is compatible with the Z-coil series, which are mesh coils that produce more flavour and vapour. The Zenith II Tank also has a convenient top-fill design, adjustable airflow control, and a diameter of 24mm.
The Go S Vape Tank by Innokin is a disposable 2ml capacity tank that utilises an innovative 1.6 Ohm mouth to lung (MTL) coil. The coil uses an organic cotton and wood pulp wicking material that is impressive at creating vapour production and flavour. Please note:Â These tanks are disposable and once the coil has burnt […]
The Innokin Endura Apex kit is the latest addition to the excellent Endura range of starter kits. Despite the addition of adjustable output, this gadget is still easy to use. This adjustment is made by rotating a dial on the mod’s base to obtain a high (Red LED) or low (Green LED) output. There is a USB charging port with a 0.8A charge rate and an internal 1800mAh battery.
The Smok TFV18 Mini Meshed Coils are compatible with the Smok TFV18 Mini Tank. They are designed with a large mesh heating area and provide three options for you to choose from, all for DTL (direct-to-lung) vaping. Each coil has a different mesh arrangement and so they provide slightly different experiences. See the table below to find the best-suited […]
We present to you the cloud kicking and flavour producing Uwell Valyrian 3 coils. These come in 2 mesh variations: SS316L 0.32Ω UN2 and FeCrAl 0.14Ω UN2-2. SS316L 0.32Ω UN2 – 80-85W for sharp flavour and smooth airflow FeCrAl 0.14Ω UN2-2 – 80-90W for in-depth, layered flavour production These coils were largely based off the very successful Valyrian 2 […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.