0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
Nitecore I2 IntelliCharger is a two-bay battery charger that can charge multiple types of batteries, including Li-ion, Ni-MH, and Ni-Cd. It features an intelligent charging system that automatically detects the type of battery and applies the appropriate charging mode. The charger also has a digital LCD screen that displays the charging status, voltage and current of each slot
The Innokin ZF Coils are available in 0.2Ω and 0.3Ω. They are designed to produce a phenomenal DTL/RDTL experience. These coils are the first to feature Innokin’s DuoPrime Mesh system which integrates an outer coil as well as the traditional inner coil. The outer coil helps with pulling liquid into the coil, pre-heats the coil, and directs it to the inner […]
Go S Tank is a small and portable tank for e-liquids. It has a 2ml e-liquid capacity and works with Innokin’s “Slipstream” coils. The Go S Tank has a convenient top-fill design for easy refilling and a built-in adjustable airflow control for customised vapour production. The tank is made of long-lasting stainless steel and Pyrex glass and comes in a variety of colours.
This is the ideal option for you if your original glass tube is cracked and you’re looking for a backup. It is the Pyrex replacement clear normal/bulb glass tube for the Wismec Gnome King tank atomizer.
Elevate Your Vaping Experience with the Lost Mary Tappo Pod Kit Unparalleled Convenience with Inhale Activation Discover the future of vaping with the Lost Mary Tappo Pod Kit, where innovation meets simplicity. Our buttonless design and inhale-activated technology redefine convenience. No more buttons to press – just draw in, and experience instant satisfaction. Embrace the […]
The Geek vape A Series coils are suitable for the Geek vape Z MTL tank only. Never forget to prime fresh coils. Install the coil, add a few drops of vape juice, and wait five minutes before using. By doing this, you may prevent dry hits and coil burning by making sure the coil is wet.
Select at least 2 products
to compare
Reviews
There are no reviews yet.