0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
Specific use with the Aspire Flexus replacement pods is intended for the Aspire Flexus coils. The Aspire Flexus Q Replacement Coils are the original AF Coil Series designed for the Flexus Q Pod System. They have a mesh heating element, press-fit coil installation, and are available in two different mesh coil resistances: 0.6 ohm and 1.0 ohm.
The Aspire Cleito Replacement coils are made exclusively for the Cleito, Cleito Pro, and Cleito Exo tanks. They have a cutting-edge coil design that enhances flavors and produces a tonne of vapour. Aspire Cleito atomizers are available in a range of resistances. The Cleito replacement atomizer is 0.5ohm rated (60-80W for the Cleito Pro), the 0.15ohm Cleito Mesh coil is rated (60-75W), and the 0.4ohm Cleito atomizer made of SS316L material is rated (55-65W) This coil has wattage mode and temperature control mode capabilities.
The Geekvape Aegis Legend 2 Starter Kit contains both the Aegis Legend 2 mod and the Zeus Tank sub-ohm tank. The Aegis Legend 2 mod is powered by dual 18650 batteries (not included) and has a maximum output of 200 watts. It is also resistant to water, dust, and shock, making it a long-lasting and dependable device.
The tiny Innokin Axiom M21 Tank and the Kroma-A Axiom Kit are both compatible with the Axiom M21 replacement coils. This coil is available in two variations, both of which were created for sub ohm vaping. We advise using them with high VG e-liquids that are 60% VG or above for the greatest results.
The Innokin Jem Vape Kit is a small and portable vaping device for use with e-liquids. It has a 1000mAh built-in battery and a 2ml e-liquid capacity. The kit includes a Jem tank with a 1.6ohm coil already installed as well as a spare 1.6ohm coil. The device also has a simple one-button design that makes it simple to use.
Geekvape M100 Aegis 100W Starter Kit includes both the M100 mod and the Cerberus sub-ohm tank. The M100 mod is powered by a single 18650 battery (not included) and has a maximum output of 100 watts. It is also water, dust and shock resistant, making it a durable and reliable device. The Cerberus tank has a capacity of 2ml and is compatible with the Super Mesh coils, which are designed to deliver a great flavour and vapour production
Select at least 2 products
to compare
Reviews
There are no reviews yet.