0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
Minican Plus Replacement Pod is a small container that holds the e-liquid or vape juice that is used in the device. These pods are usually disposable and come in a variety of flavours and nicotine strengths. They are designed to be easy to install and remove, making it simple for users to switch between flavours or replace a used pod.
Aspire Tigon Pod Kit is a portable vaping device that works with nicotine salt e-liquids. It is a closed-loop system, which means it uses pre-filled pods rather than a tank that can be filled with e-liquid. The device is simple to use and comes with a 1000mAh built-in battery.
The AF Coils by Aspire are mesh MTL style coils which produce really good flavour and a discreet cloud. The mesh allows for a longer life span and a heightened flavour production due to the more even heating of the coil. They are pressure-fit coils meaning that to install them, you simply push them into […]
Grape & Strawberry Candy Drops 50-50 is now available in a 50/50 ratio in Moreish Puff. Drops of sweet hard candy infused with strawberry and grape flavours. A strawberry and grape aromatized, fruity inhale a sugary and candied finish
The Zenith Tank requires the 0.8-ohm coil head, rated for 15 to 18W, or the 1.6-ohm coil head, rated for 10 to 14W, of the Innokin Zenith Replacement Coils. Five (5) replacement coils are included in each bundle of coils.
Introducing the Uwell Crown M Coils. Available in two options, both for dual MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. Uwell has used never before seen Twin Coil technology which they have applied to the 0.4Ω/0.8Ω Coil. In simple terms, the coil has 2 mesh heating elements which can fire together, […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.