0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Whirl 22 Kit 3.5ml Replacement bulb glass is available. This replacement item is specifically created for the Whirl 22 Kit and is designed to replace the device’s original glass bulb. If the original glass is cracked or broken, you can use the replacement glass to keep using the gadget without having to buy a new one.
Introducing the Uwell Caliburn AZ3 Pod Kit: Your Perfect Companion for Discreet, On-the-Go Vaping! Experience ultimate convenience and portability with the Uwell Caliburn AZ3 Pod Kit, thoughtfully designed for vapers who crave simplicity without sacrificing performance. Crafted for both novices and seasoned enthusiasts, this pocket-sized pod system boasts a built-in 750mAh battery and a maximum […]
Flexus Q Replacement Pod is designed to be easy to install and remove, making it simple for users to switch between flavours or replace a used pod. The Flexus Q Replacement Pods are specifically designed for the Flexus Q Device and may not be compatible with other vaping devices. It may have different ohm resistance and airflow system to the Minican Plus Pod
For use with the Lost Mary Tappo Pod Kit, these pods come pre-filled with 2ml of 20mg Nic Salt and are available in 15 classic Lost Mary disposable flavours. With a built-in QUAQ Mesh coil and pre-filled e-liquid, these pods require no maintenance and can just be discarded once empty. The QUAQ Mesh technology creates […]
The Aspire Flexus Blok Vape Kit is a small and lightweight vaporizer. It has a modern, ergonomic design and a 1000mAh battery that is already inside. The system is made to work with Aspire Flexus Blok Replacement Pods, which have a built-in coil and a 2ml e-liquid capacity.
HorizonTech’s Sakerz Coils look like regular pod kit coils however, they harness some powerful mesh heating elements which allow for a full sub-ohm vaping experience. Available in 2 resistances and coil structures which gives you the option to pick your favourite one. They are pressure fit into the tank so all you have to do […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.