0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
2 x EFEST IMR 18650 Rechargeable batteries are known for their high energy density, long cycle life and low self-discharge rate. They also have a built-in protection circuit that prevents overcharging, over-discharging, and short-circuiting, which makes them safer to use than many other types of rechargeable batteries.
Experience Timeless Vaping Performance with the Innokin Klypse Mecha Pod Kit The Innokin Klypse Mecha Pod Kit is a feast for the eyes. The complex mechanical design makes this one of the most unique pod kits on the market. It is packed with impressive features such as a multi-functional screen, smart wattage recognition and widely adjustable […]
This is the ideal option for you if your original glass tube is cracked and you’re looking for a backup. It is the Pyrex replacement clear normal/bulb glass tube for the Wismec Gnome King tank atomizer.
The Geek vape A Series coils are suitable for the Geek vape Z MTL tank only. Never forget to prime fresh coils. Install the coil, add a few drops of vape juice, and wait five minutes before using. By doing this, you may prevent dry hits and coil burning by making sure the coil is wet.
Introducing the Innokin Endura S1 Pod Kit, the perfect balance of convenience and performance. This refillable system combines the ease of disposable vapes with the reliability of traditional devices, ensuring a satisfying and long-lasting vaping experience. Never settle for anything less than the best and indulge in full vaping pleasure for extended periods. Designed to […]
Resa Prince, is a vaping device with a capacity of 7.5ml. This replacement part is specifically designed for the Resa Prince and is intended to replace the original glass bulb that came with the device. The replacement glass can be used if the original glass is broken or cracked,
Select at least 2 products
to compare
Reviews
There are no reviews yet.