0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
The AF Coils by Aspire are mesh MTL style coils which produce really good flavour and a discreet cloud. The mesh allows for a longer life span and a heightened flavour production due to the more even heating of the coil. They are pressure-fit coils meaning that to install them, you simply push them into […]
Bubblegum Lollies 50-50 vape juice is designed to mimic the sweet and fruity flavour of a bubblegum lollipop. It has a sweet and sugary taste with a hint of fruitiness and is a blend of bubblegum and lollipop flavour.
VLTZ Flex Pods are designed for use with the VLTZ Flex Pod Kit. They are pre-filled with 2ml of 16mg (1.6%) Nicotine Salt and aim to give you the same experience you would get when vaping disposables. The slightly lower nicotine strength, to the 20mg normally found in disposables, is because of the slightly higher […]
These are replacement coils for the Innokin iClear 20D clearomiser that was first shipped with the EZ.TC Starter Kit. These 316L, stainless steel coils can be used in Wattage mode, however, they are specially optimized for temperature-controlled vaping. You may swap out the coil heads for the iClear 20D as well without draining the e-liquid from the clearomiser. Coils for the iClear 20D are available with a 0.5 Ohm resistance.
Aspire BP Stik Pods come empty and without any coils. They have a 2ml capacity and take pressure-fit coils which easily press into place without the need of screwing/unscrewing the coil when replacing it. For full coil compatibility, check the table below. Fitted with leak-proof silicone seals, you can rest assured that your vaping experience […]
The ITO Coils by VooPoo come in a range of 4 different resistances. Suitable for both RDTL and MTL vaping. All coils are mesh and are designed for maximum flavour output and coil longevity. Featuring a quad silicone o-ring design, the coils are pressure fit into your device and hugely minimize the chance of leakage. […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.