0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Specific use with the Aspire Flexus replacement pods is intended for the Aspire Flexus coils. The Aspire Flexus Q Replacement Coils are the original AF Coil Series designed for the Flexus Q Pod System. They have a mesh heating element, press-fit coil installation, and are available in two different mesh coil resistances: 0.6 ohm and 1.0 ohm.
The Vaporesso GTi coils came about in May 2022. A highly improved series of coils from the previous GT coils you might remember. The coils are pressure fit rather than screw-in and feature the latest mesh coil technology created for maximum flavour and cloud production. There are 5 resistances which cater for different power settings […]
Finic YC Replacement Coils are high performing atomizers for your Finic AiO 16 and 20 Device. Five YC coils are included in each pack, which comes in three different resistance options. Direct to Lung: YC-R1 0.6-ohm, Mouth to Lung: YC-R2 1.2 ohm, and Mouth to Lung: YC-C 1.8 ohm
These authentic Geek Vape Super Mesh coils for the Geek Vape Cerberus Tank are the best coils on the market for this tank series. They also fit the Geek Vape Shield and Aero Sub Ohm Tanks. Single mesh coil designs are used in the Super Mesh coils to enhance taste, vapor, and coil longevity. 30W to 45W is the power range for the 0.3-ohm X2 Double Mesh Coil. Regardless of the coil you use, savor incredible flavor and vapor production!
Replacement Vaporesso ECO Nano Pods have a great built-in mesh coil that features Vaporesso’s impressive Corex Heating Technology that increases longevity by up to 50%! Corex also adds to flavour production that brings out the best in your favourite e-liquid. Each pod has a 2ml capacity which is replenished via the bottom-fill port which is covered […]
Go Z Tank is compatible with the Z-coil series, which are mesh coils that provide enhanced flavour and vapour production. The Go Z Tank also has a convenient top-fill design and adjustable airflow control for customizable vapour production.
Select at least 2 products
to compare
Reviews
There are no reviews yet.