0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
The Flexus Q Pod Vape Kit is a kind of electronic cigarette that uses vape juice-filled pods rather than conventional tanks. The Flexus Q Pod Vape kit is a lightweight, portable gadget with an intuitive design. Â The pods normally come in a range of flavours and nicotine levels and are pre-filled with e-liquid.
Replacement Vaporesso ECO Nano Pods have a great built-in mesh coil that features Vaporesso’s impressive Corex Heating Technology that increases longevity by up to 50%! Corex also adds to flavour production that brings out the best in your favourite e-liquid. Each pod has a 2ml capacity which is replenished via the bottom-fill port which is covered […]
The Smok TA Coils come in 3 resistance variants. Both coils are designed to produce outstanding flavour and cloud thanks to the mesh technology within them. The mesh also allows them to last longer than regular round wire coils. You can use these coils with the Smok T-Air Subtank. To install the coils, unscrew the […]
The UB (Ultra Boost) Lite Tank by Lost Vape combines MTL (Mouth To Lung) with DTL (Direct To Lung) into one tank. Switch between loads of different Lost Vape UB Lite Coils to customise your experience and achieve exactly what you want from the tank. You can use it on any mod with a 510 […]
The Zlide Tank has a convenient top-fill design and adjustable airflow control, and it has a diameter of 22mm. The tank is made from durable stainless steel and Pyrex glass, and it is available in a variety of colours. The Zlide Tank is a great option for those looking for a high-performance tank with good flavour and vapour production that is easy to use. It is compatible with a wide range of devices, making it a versatile option for vapers.
The VooPoo PnP Pod Tank can flexibly switch between from being a pod to a vape tank. Compatible with the full range of VooPoo PnP coils as well as their RBA version, the PNP Tank has a magnetic base that sits perfectly in both the VooPoo Drag S and Drag X Kits. With the 510 base the PnP Pod tank […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.