0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
The Zeus X Mesh RTA is intended to be used with the Geek vape Zeus X Micro Mesh Coils. Users now have access to all the parts needed to assemble their own RTA thanks to the mesh coil’s inclusion of feather cotton.
Introducing the Uwell Caliburn AZ3 Pod Kit: Your Perfect Companion for Discreet, On-the-Go Vaping! Experience ultimate convenience and portability with the Uwell Caliburn AZ3 Pod Kit, thoughtfully designed for vapers who crave simplicity without sacrificing performance. Crafted for both novices and seasoned enthusiasts, this pocket-sized pod system boasts a built-in 750mAh battery and a maximum […]
Aspire TG Pods are great pods for Mouth To Lung vaping. The round mouthpiece resembles a cigarette filter and provides a smooth vape which is why these are great for ex-cigarette smokers. Each pod comes with a built-in coil so don’t worry about replacing the coil. Just discard the pod and open up a new one. […]
Specific use with the Aspire Flexus replacement pods is intended for the Aspire Flexus coils. The Aspire Flexus Q Replacement Coils are the original AF Coil Series designed for the Flexus Q Pod System. They have a mesh heating element, press-fit coil installation, and are available in two different mesh coil resistances: 0.6 ohm and 1.0 ohm.
The Zlide Tank has a convenient top-fill design and adjustable airflow control, and it has a diameter of 22mm. The tank is made from durable stainless steel and Pyrex glass, and it is available in a variety of colours. The Zlide Tank is a great option for those looking for a high-performance tank with good flavour and vapour production that is easy to use. It is compatible with a wide range of devices, making it a versatile option for vapers.
The Go S Vape Tank by Innokin is a disposable 2ml capacity tank that utilises an innovative 1.6 Ohm mouth to lung (MTL) coil. The coil uses an organic cotton and wood pulp wicking material that is impressive at creating vapour production and flavour. Please note:Â These tanks are disposable and once the coil has burnt […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.