0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
The Zeus X Mesh RTA is intended to be used with the Geek vape Zeus X Micro Mesh Coils. Users now have access to all the parts needed to assemble their own RTA thanks to the mesh coil’s inclusion of feather cotton.
The Smok TFV18 Mini Meshed Coils are compatible with the Smok TFV18 Mini Tank. They are designed with a large mesh heating area and provide three options for you to choose from, all for DTL (direct-to-lung) vaping. Each coil has a different mesh arrangement and so they provide slightly different experiences. See the table below to find the best-suited […]
It is advised to use Geek Vape Framed Staple F202 2-in-1 premade coils with a variety of rebuildable atomizers, including RDAs, RTAs, and RDTAs. Only experienced vapers are advised to use these coils. Each kit contains two different kinds of vape coils: a 0.25 Ohm Framed Staple Fused Clapton and a 0.2 Ohm Framed Staple Twisted.
Grape & Strawberry Candy Drops 50-50 is now available in a 50/50 ratio in Moreish Puff. Drops of sweet hard candy infused with strawberry and grape flavours. A strawberry and grape aromatized, fruity inhale a sugary and candied finish
Unleash Flavorful Freedom with the Vaporesso Luxe Q2 Pod Kit! Elevate Your Vaping Experience with Precision Flavour Control Indulge in the art of vaping with the Vaporesso Luxe Q2 Pod Kit, meticulously crafted for enthusiasts who crave a customized flavour experience. Our revolutionary COREX Heating Technology ensures that every puff is a burst of rich […]
Resa Prince, is a vaping device with a capacity of 7.5ml. This replacement part is specifically designed for the Resa Prince and is intended to replace the original glass bulb that came with the device. The replacement glass can be used if the original glass is broken or cracked,
Select at least 2 products
to compare
Reviews
There are no reviews yet.