0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
The new Geek Vape Aegis BOOST Replacement Coils, a collection of mesh coils designed to capture the subtle nuances of your preferred e-liquid or nicotine salts. The Geek Vape AEGIS BOOST offers a 0.6ohm KA1 Mesh Coil and will produce delicious clouds.
Uwell Caliburn G2 Coils are compatible with a variety of Uwell Caliburn Pod Kits. check the table below for the full compatibility list. Available in two different resistances, both of which are great for MTL (Mouth To Lung) vaping. With an advanced mesh coil structure, Caliburn G2 Coils produce great flavour and a smooth throat […]
The Aspire Cleito 120 coil does away with the necessity for the tank’s centre chimney. By doing away with the requirement for a static chimney inside the tank itself, the Cleito 120 design releases even more restriction on the airflow. As a result, the flavors profile is enlarged, and the number of vapors produced rises.
Flexus Q Replacement Pod is designed to be easy to install and remove, making it simple for users to switch between flavours or replace a used pod. The Flexus Q Replacement Pods are specifically designed for the Flexus Q Device and may not be compatible with other vaping devices. It may have different ohm resistance and airflow system to the Minican Plus Pod
GeekVape’s Q Series Pods come with pre-installed, non-replaceable coils. they are available in three different resistances to suit almost any MTL (Mouth To Lung) or RDTL (Restricted Direct To Lung) vaper. The built-in coil feature means less mess and fuss once a coil burns out. Rather than replacing the coil which can be tedious and […]
Finic YC Replacement Coils are high performing atomizers for your Finic AiO 16 and 20 Device. Five YC coils are included in each pack, which comes in three different resistance options. Direct to Lung: YC-R1 0.6-ohm, Mouth to Lung: YC-R2 1.2 ohm, and Mouth to Lung: YC-C 1.8 ohm
Select at least 2 products
to compare
Reviews
There are no reviews yet.