0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Introducing the Elf Bar Elfa Pro Pods, specially designed for the Elf Bar ELFA Pro Pod Kit. These pre-filled pods contain 2ml of e-liquid, each containing 20mg of nicotine salts, ensuring fast-acting and long-lasting nicotine satisfaction. Experience the perfect balance of intense flavour and smooth throat hits. With a 50VG/50PG ratio, these pods are ideal […]
Aspire TG Pods are great pods for Mouth To Lung vaping. The round mouthpiece resembles a cigarette filter and provides a smooth vape which is why these are great for ex-cigarette smokers. Each pod comes with a built-in coil so don’t worry about replacing the coil. Just discard the pod and open up a new one. […]
Aspire BP Stik Pods come empty and without any coils. They have a 2ml capacity and take pressure-fit coils which easily press into place without the need of screwing/unscrewing the coil when replacing it. For full coil compatibility, check the table below. Fitted with leak-proof silicone seals, you can rest assured that your vaping experience […]
A refilling pod for the Aspire Flexus Blok device is the Aspire Flexus Blok Replacement Pod. These pods are made to be placed into the device after being filled with e-liquid. It has a built-in coil and a 2ml e-liquid capacity. It is a fantastic alternative to disposable pods for vapers who wish to use their own e-liquid.
Innokin’s ArcFire Pods come in two resistances, both designed for Mouth To lung (MTL) vaping in the ArcFire Pod Kit. They are tinted black to match the aesthetic of the device but you can still easily see your e-liquid level to avoid burnt hits. Each pod has a 2ml capacity which you replenish using the […]
The Smok TFV18 Mini Meshed Coils are compatible with the Smok TFV18 Mini Tank. They are designed with a large mesh heating area and provide three options for you to choose from, all for DTL (direct-to-lung) vaping. Each coil has a different mesh arrangement and so they provide slightly different experiences. See the table below to find the best-suited […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.