0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Aspire BP Stik Pods come empty and without any coils. They have a 2ml capacity and take pressure-fit coils which easily press into place without the need of screwing/unscrewing the coil when replacing it. For full coil compatibility, check the table below. Fitted with leak-proof silicone seals, you can rest assured that your vaping experience […]
Honey & Creme Tobacco 50-50 vape juice is a type of electronic cigarette or vaporizer e-liquid. It’s a honey and cream-flavoured e-liquid with a hint of tobacco flavour. It is intended to have a sweet and creamy taste with a hint of tobacco, similar to the taste of a traditional cigarette.
The Innokin iSub SS BVC Coil is a versatile coil, compatible with the iSub vape tank series, including the iSub G Tank, Oceanus Vape Kit and iSub tank. Registering at 0.5 Ohm resistance, it utilizes Stainless Steel Wire, meaning it can be used in both Variable Wattage and Temperature Control Modes. Additionally, this model features Innokin’s specifically created BVC (Bottom Vertical Coil) configuration, which will improve flavor and cloud production. The iSub BVC SS also comes with the no spill coil swap system.
Experience Timeless Vaping Performance with the Innokin Klypse Mecha Pod Kit The Innokin Klypse Mecha Pod Kit is a feast for the eyes. The complex mechanical design makes this one of the most unique pod kits on the market. It is packed with impressive features such as a multi-functional screen, smart wattage recognition and widely adjustable […]
The Vaporesso GTi coils came about in May 2022. A highly improved series of coils from the previous GT coils you might remember. The coils are pressure fit rather than screw-in and feature the latest mesh coil technology created for maximum flavour and cloud production. There are 5 resistances which cater for different power settings […]
The Innokin Endura T18 II Prism is a cute small tank with lots of power. Both the new T18 II and the Endura T18 E are compatible with the Prism. A 1.5-ohm coil transforms your liquid into delectable vapour that is surprisingly thick for such a sleek classic-style kit. Please be aware that only the T18 E coils—which come in a variety of resistances to fit your personal vaping style—will function with this tank.
Select at least 2 products
to compare
Reviews
There are no reviews yet.