0%
£5.49
Minican Plus Replacement Pod is a small container that holds the e-liquid or vape juice that is used in the device. These pods are usually disposable and come in a variety of flavours and nicotine strengths. They are designed to be easy to install and remove, making it simple for users to switch between flavours or replace a used pod.
The replacement pod in the Aspire Minican Plus is a pod-based device that holds e-liquid and can be detachable and refilled. You can check with authorized Aspire dealers or online vape stores to find the replacement pod for your Aspire Minican Plus device. A list of authorized dealers from which you can purchase genuine device replacement parts is available on the official Aspire website. On online marketplaces like I Vape store , you can also look for “Aspire Minican Plus replacement pod.” However, to avoid counterfeit goods, make sure to purchase from a reputable vendor.
Because not all Pods are universal, check that the replacement pod you buy is compatible with the model of your particular device. Information regarding the replacement pod’s compatibility should be available on the product packaging or the official website. The 3.5 ml replacement pod for the Aspire Minican Plus features an integrated 0.8-ohm mesh coil for a smooth vaping experience and pure flavor. Additionally, the pod has a convenient bottom filling system that lets you refill it without taking it out of the device.
Each replacement pod for the Aspire Minican and Minican Plus Pod Device can hold up to 2 milliliters of E-Liquid . MTL can be used with nicotine salt-based e-liquids thanks to the pre-installed 1.2- or 0.8-ohm mesh coil. Attractive association permits fixed and safe situation of the cases into the gadget, while base silicone plugs make it conceivable to top off the units in a simple and speedy manner.
| 1 | Size: | 75mm x 40mm x 15.8mm |
|---|---|---|
| 2 | Weight: | 40.9gramsL |
| 3 | Material: | PCTG |
| 4 | Battery: | 850mAh |
| 5 | Pod Capacity: | 2mL |
The Nitecore I4 IntelliCharger is a four-bay battery charger that can charge multiple types of batteries, including Li-ion, Ni-MH, and Ni-Cd. It features an intelligent charging system that automatically detects the type of battery and applies the appropriate charging mode
The Innokin ZF Coils are available in 0.2Ω and 0.3Ω. They are designed to produce a phenomenal DTL/RDTL experience. These coils are the first to feature Innokin’s DuoPrime Mesh system which integrates an outer coil as well as the traditional inner coil. The outer coil helps with pulling liquid into the coil, pre-heats the coil, and directs it to the inner […]
These are replacement coils for the Innokin iClear 20D clearomiser that was first shipped with the EZ.TC Starter Kit. These 316L, stainless steel coils can be used in Wattage mode, however, they are specially optimized for temperature-controlled vaping. You may swap out the coil heads for the iClear 20D as well without draining the e-liquid from the clearomiser. Coils for the iClear 20D are available with a 0.5 Ohm resistance.
The Geek vape A Series coils are suitable for the Geek vape Z MTL tank only. Never forget to prime fresh coils. Install the coil, add a few drops of vape juice, and wait five minutes before using. By doing this, you may prevent dry hits and coil burning by making sure the coil is wet.
The Smok TFV18 Mini Meshed Coils are compatible with the Smok TFV18 Mini Tank. They are designed with a large mesh heating area and provide three options for you to choose from, all for DTL (direct-to-lung) vaping. Each coil has a different mesh arrangement and so they provide slightly different experiences. See the table below to find the best-suited […]
Go Z Tank is compatible with the Z-coil series, which are mesh coils that provide enhanced flavour and vapour production. The Go Z Tank also has a convenient top-fill design and adjustable airflow control for customizable vapour production.
Select at least 2 products
to compare
Reviews
There are no reviews yet.