0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
Aspire Flexus AIO Pods are only compatible with the Flexus AIO Pod Kit. With a 2ml capacity which you replenish via the top-fill port, these pods are easy to use and maintain. Featuring convenient plug-and-play coil installation, even a first-time vaper will find it easy to replace the Aspire AF Coils. To refill the Flexus […]
The newest ISub Clapton BVC coils from Innokin have a resistance of 0.5 ohm and are made of a base wire with a smaller gauge of wire wrapped around it to increase surface area and boost vapor and flavor production. They are recommended for use at 30 to 70 watts. Compatible with the Isub, Isub G, Isub V, Apex, and Isub S tanks; 5 pieces per pack.
These are replacement coils for the Innokin iClear 20D clearomiser that was first shipped with the EZ.TC Starter Kit. These 316L, stainless steel coils can be used in Wattage mode, however, they are specially optimized for temperature-controlled vaping. You may swap out the coil heads for the iClear 20D as well without draining the e-liquid from the clearomiser. Coils for the iClear 20D are available with a 0.5 Ohm resistance.
The Go S Vape Tank by Innokin is a disposable 2ml capacity tank that utilises an innovative 1.6 Ohm mouth to lung (MTL) coil. The coil uses an organic cotton and wood pulp wicking material that is impressive at creating vapour production and flavour. Please note:Â These tanks are disposable and once the coil has burnt […]
Smok’s Novo Master Box Pod Kit is a great option for any Mouth To Lung (MTL) vaper as it merges convenience with premium performance. The 1000mAh battery permits a full day of vaping in Boost Mode (30W) whilst the adjustable airflow and power allow for a custom vaping experience that suits your style. Ideal for beginners and […]
The AF Coils by Aspire are mesh MTL style coils which produce really good flavour and a discreet cloud. The mesh allows for a longer life span and a heightened flavour production due to the more even heating of the coil. They are pressure-fit coils meaning that to install them, you simply push them into […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.