0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
The Uwell Whirl S Tank is a 2ml top refillable mouth to lung vaping device which can be adjusted to suit your vaping style. Fully open the airflow to give you an intense restricted direct to lung draw. This tank is compatible with the Uwell Whirl S Kit and is made by Uwell who have used high […]
The Voopoo Drag X-S 510 adapter is an accessory that allows the Voopoo Drag X-S device to be used with atomizers that have a 510 connection. It is a metal ring that is placed over the device’s built-in pod connector, allowing the device to be compatible with a wider variety of atomizers.
Vilter Replacement Pods are designed to be easy to install and remove, making it simple for users to switch between flavours or replace a used pod. The Vilter Replacement Pods are specifically designed for use with a Vilter vaping device, and may not be compatible with other vaping devices
Hazelnut Vienna Brewed 50-50 typically includes flavorings like Vienna coffee and hazelnut in addition to a 50/50 mix of Propylene Glycol (PG) and Vegetable Glycerin (VG). The user inhales vapor as the e-cigarette’s atomizer heats the e-liquid, emulating the sensation of smoking a conventional cigarette.
The Vaporesso GTi coils came about in May 2022. A highly improved series of coils from the previous GT coils you might remember. The coils are pressure fit rather than screw-in and feature the latest mesh coil technology created for maximum flavour and cloud production. There are 5 resistances which cater for different power settings […]
These are replacement coils for the Innokin iClear 20D clearomiser that was first shipped with the EZ.TC Starter Kit. These 316L, stainless steel coils can be used in Wattage mode, however, they are specially optimized for temperature-controlled vaping. You may swap out the coil heads for the iClear 20D as well without draining the e-liquid from the clearomiser. Coils for the iClear 20D are available with a 0.5 Ohm resistance.
Select at least 2 products
to compare
Reviews
There are no reviews yet.