0%
The PCTG Innokin Go Z tank has a capacity of up to 2 milliliters, easy airflow adjustment, and very simple filling. You should simply slide off the top piece of the tank, so there is compelling reason need to unscrew anything, and you can top off the tank with no issues and without eliminating it from the battery. After removing the bottom base’s screws, the heating head can be simply inserted into the tank. You are able to completely tailor the draw’s tightness to your requirements thanks to the bottom airflow adjustment. You can without much of a stretch appreciate both delightfully fixed and wonderfully free draws by essentially turning the ring on the base.
I see now! A well-liked sub-ohm tank for vaping is the Innokin Go Z Tank. It has an adjustable airflow control, a 2-milliliter E-Liquid capacity, and was made to be used with high-VG e-liquids. The Go Z Tank makes use of the Z Coil technology from Innokin, which is known for producing excellent flavor and vapor. It is compatible with Z Coils with resistances ranging from 0.2 ohm to 0.8 ohm and comes pre-installed with a 0.5-ohm Z Plex3D coil. By and large, the Innokin Go Z Tank is a solid and easy to understand tank that is perfect for both novice and experienced vapers.
For those who are looking for a healthier and more flavorful alternative to tobacco, the adjustable airflow ring lets you fine-tune the ideal MTL draw. The Innokin Go Z tank uses the 1.6-ohm Z coil, which makes it easy to find Coils for your device. If it’s not too much trouble, note: The 1.6-ohm Z coil is the only one that works with the Go Z tank.
It is always a welcome relief when refilling your tank is simple and free of mess because nobody likes a complicated device that is difficult to maintain. Fortunately, the Innokin Go Z tank has a top-fill, slide-to-open system that is not only easy to use but also designed to help you avoid the dreaded sticky hands that can occur when changing out e-liquid in other tanks.
1x Innokin Go Z + Tank.
1x Spare parts
| 1 | Product name: | Innokin Go Z tank. |
|---|---|---|
| 2 | Tank capacity: | 2.0ml |
| 3 | Connection: | 510 |
| 4 | Resistance: | 1.6ohm Z-coil |
| 5 | Airflow: | adjustable |
| 6 | How to fill the tank: | push top cap to fill. |
| 7 | Body material: | PCTG |
| 8 | Coil material: | Kal |
The Zenith Tank requires the 0.8-ohm coil head, rated for 15 to 18W, or the 1.6-ohm coil head, rated for 10 to 14W, of the Innokin Zenith Replacement Coils. Five (5) replacement coils are included in each bundle of coils.
Introducing the Uwell Crown M Coils. Available in two options, both for dual MTL (Mouth To Lung) and RDTL (Restricted Direct To Lung) vaping. Uwell has used never before seen Twin Coil technology which they have applied to the 0.4Ω/0.8Ω Coil. In simple terms, the coil has 2 mesh heating elements which can fire together, […]
Caliburn Explorer Empty Replacement Pods are only compatible with the Uwell Caliburn Explorer Pod Kit. With a unique dual-chamber design, they can be filled with two separate e-liquids and take two coils at the same time. When placed into the device, you can choose to use one at a time, both at the same time or alternate […]
2 x EFEST IMR 18650 Rechargeable batteries are known for their high energy density, long cycle life and low self-discharge rate. They also have a built-in protection circuit that prevents overcharging, over-discharging, and short-circuiting, which makes them safer to use than many other types of rechargeable batteries.
The Geek vape A Series coils are suitable for the Geek vape Z MTL tank only. Never forget to prime fresh coils. Install the coil, add a few drops of vape juice, and wait five minutes before using. By doing this, you may prevent dry hits and coil burning by making sure the coil is wet.
The Smok Stick R22 empty tank is specifically designed for the Smok Stick R22 Kit. It makes changing the RPM coils easy with a simple push-fit coil installation, while maintaining a convenient top filling system – so you wont need to take your device to pieces, and prevents leakage Vape the way you want to […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.