0%
£9.49
The Innokin Endura Apex kit is the latest addition to the excellent Endura range of starter kits. Despite the addition of adjustable output, this gadget is still easy to use. This adjustment is made by rotating a dial on the mod’s base to obtain a high (Red LED) or low (Green LED) output. There is a USB charging port with a 0.8A charge rate and an internal 1800mAh battery.
Another product from the reputable vaping brand Innokin is the Endura Apex tank. It is a high-powered, sub-ohm tank that can be used with vaping devices. The tank is made of high-quality stainless steel and Pyrex glass with a capacity of 2 milliliters, making it long-lasting and resistant to damage. The Endura Apex tank has a top-fill design that makes it simple to refill with E-Liquid without having to take it apart. Additionally, it has a control for the airflow that you can adjust to suit your preferred vaping style. The 0.5-ohm Plex3D coil and the 0.48-ohm mesh coil, both of which are intended to provide a flavorful and smooth vaping experience, are included in the tank.
The Endura Apex tank’s “slide to open” top cap is one of its special features. This design makes it simple to replace or clean the coil. Additionally, the tank has a 510-thread connection, making it compatible with numerous mods and vaping devices. By and large, the Endura Peak tank is an extraordinary decision for vapers who need a sub-ohm tank that conveys great execution, comfort, and solidness.
The Innokin Endura Apex tank is ideal for vapers who want a tank that delivers both an MTL (Mouth to Lung) and RDTL (Restricted Direct To lung) vape. Compatible with the Innokin Prism S coils, this tank includes a 0.9 Ohm mesh coil and a 0.8 coil. These Coils will create a small amount of vapor producing a vape that feels closer to a cigarette.
1 x Innokin Prism T20S Tank
1 x 0.9 Ohm Mesh Prism-S Coil (Pre-Installed)
1 x 0.8 Ohm Prism- S Coil
Spare O-Rings
1 x User Manual
| 1 | 2ml tank | |
|---|---|---|
| 2 | Top-fill design | |
| 3 | Compatible with Prism Coils | |
| 4 | Mesh build | |
| 5 | Push To Fit Coils | |
| 6 | Fixed Dual Airflow |
The ITO Coils by VooPoo come in a range of 4 different resistances. Suitable for both RDTL and MTL vaping. All coils are mesh and are designed for maximum flavour output and coil longevity. Featuring a quad silicone o-ring design, the coils are pressure fit into your device and hugely minimize the chance of leakage. […]
The Geek vape A Series coils are suitable for the Geek vape Z MTL tank only. Never forget to prime fresh coils. Install the coil, add a few drops of vape juice, and wait five minutes before using. By doing this, you may prevent dry hits and coil burning by making sure the coil is wet.
VLTZ Flex Pods are designed for use with the VLTZ Flex Pod Kit. They are pre-filled with 2ml of 16mg (1.6%) Nicotine Salt and aim to give you the same experience you would get when vaping disposables. The slightly lower nicotine strength, to the 20mg normally found in disposables, is because of the slightly higher […]
The Innokin Plex3D iSub Coils are compatible with the Innokin DV pod system kit and the iSub-B 2ml Tank. The Plex3D design contains “Micro-Grooves” and employs organic cotton and wood pulp wicking for improved flavor absorption from your e-liquid. It uses 3D Mesh Coil Technology. The Plex3D Coils have a recommended wattage range of 30 to 55W and include quick heat-up and cool-down times, which significantly increase coil life.
These authentic Geek Vape Super Mesh coils for the Geek Vape Cerberus Tank are the best coils on the market for this tank series. They also fit the Geek Vape Shield and Aero Sub Ohm Tanks. Single mesh coil designs are used in the Super Mesh coils to enhance taste, vapor, and coil longevity. 30W to 45W is the power range for the 0.3-ohm X2 Double Mesh Coil. Regardless of the coil you use, savor incredible flavor and vapor production!
The AF Coils by Aspire are mesh MTL style coils which produce really good flavour and a discreet cloud. The mesh allows for a longer life span and a heightened flavour production due to the more even heating of the coil. They are pressure-fit coils meaning that to install them, you simply push them into […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.