0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
Â
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
Â
Â
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
Innokin I Sub Tank Replacement Coils are interchangeable with the iSub/iSub G tanks. The housing for the coil head is composed of stainless steel. For a fresher flavour and a smoother vaping experience, the replacement coils for the iSub Tank are made with Kanthal wire and come in 0.2- and 0.5-ohm resistance.
The Aspire Flexus Blok Vape Kit is a small and lightweight vaporizer. It has a modern, ergonomic design and a 1000mAh battery that is already inside. The system is made to work with Aspire Flexus Blok Replacement Pods, which have a built-in coil and a 2ml e-liquid capacity.
The Gear V2 RTA is a work of art by Wotofo. It is a single coil 2ml RTA which will satisfy experienced vapers but is also super easy for beginners to start their rebuildable journey. The build deck is clean, easy to build on and provides a secure base for any coil of your choice. […]
The Innokin Endura Apex kit is the latest addition to the excellent Endura range of starter kits. Despite the addition of adjustable output, this gadget is still easy to use. This adjustment is made by rotating a dial on the mod’s base to obtain a high (Red LED) or low (Green LED) output. There is a USB charging port with a 0.8A charge rate and an internal 1800mAh battery.
Unleash the Power of Innokin ArcFire Pod Kit: Elevate Your Vaping Experience! Seamless Power with 650mAh Battery Revolutionize your vaping journey with the Innokin ArcFire Pod Kit and its robust 650mAh battery. Experience extended sessions without interruptions, ensuring your device keeps up with your lifestyle. The high-capacity battery guarantees long-lasting performance, making it the ideal […]
The Zlide Tank has a convenient top-fill design and adjustable airflow control, and it has a diameter of 22mm. The tank is made from durable stainless steel and Pyrex glass, and it is available in a variety of colours. The Zlide Tank is a great option for those looking for a high-performance tank with good flavour and vapour production that is easy to use. It is compatible with a wide range of devices, making it a versatile option for vapers.
Select at least 2 products
to compare
Reviews
There are no reviews yet.