0%
The Z Force Tank was made by Innokin with a precise airflow control to help vapers get the most out of their experience. Basically, slide the wind stream ring around and the wind current will change. Depending on whether you prefer a DTL or RDL vape, the dual adjustable airflow lets vapers choose between a tighter or looser airflow. It has never been more evident that Innokin cares about providing a personalized vaping experience. Additionally, the tank comes with O-ring-modified 810 drip tips, meaning that only O rings with 810s work with it.
Refilling the Z Force is a cinch thanks to its simple, quick slide top fill design. Simply flip the cap over, pour the juice inside, and then flip it back over. With their automatic juice flow control, Innokin has taken special care to design the Z Force Tank with a clever mechanism that prevents leaks. The tank will lock the e-liquid in when the coil is replaced, preventing e-liquid spills or waste during the removal of the Coils . Additionally, you won’t have to take your tank out of the mod to refill it.
The one-of-a-kind ZF coils were designed by Innokin specifically for this tank. In order to enhance flavor depth, the cotton wick is sandwiched between two mesh coils rather than a single coil. The wick on the outside mesh coil receives additional e-liquid and is pre-heated before being transferred to the inner mesh coil, where it is fully vaporized. As a result, vaping with this tank will be much more satisfying and flavorful. Find a high-VG e-liquid that goes well with this tank by looking through our selection.
For DL and RDL vaping, the all-new Innokin Z-Force tank has been refined. The Z-Force Tank has a 5 ml capacity, is leak-proof, has a quick slide top fill, and has a spring-loaded automatic juice flow control that stops E-Liquid from leaking or being wasted. he knew ZF Loop includes an extraordinary Pair Prime lattice plan, with 2 layers of cross section warming at various rates to give further developed flavor, huge fume creation, and longer curl life.
1x Z Force Tank (ZF 0.2? KAL Coil Installed)
1x Spare ZF 0.3? DTL Coil
1x Spare Clear Bubble Tube (5ml)
1x Spare Z Force O-Rings Set
1x Quick Start Guide
| 1 | Dimensions: | 28.0*49.5 |
|---|---|---|
| 2 | Capacity: | 5ml |
| 3 | Coil: | 0.3ohm 30-45W / 0.2ohm 50-80W |
| 4 | Coil Material: | KAL |
| 5 | Vape Type: | Slide Top Fill |
| 6 | DuoPrime Mesh Wicking | T18E Coils |
| 7 | Leak-Proof Design | |
| 8 | 510 Thread | |
| 9 | 810 Drip Tip | |
| 10 | Replaceable Glass | |
| 11 | The all-new Z Force DTL Tank | |
| 12 | Quick Top-Fill, 5ml E-liquid Capacity | |
| 13 | E-liquid Leak Proof Design, Prevents Leaking and Wasted E-liquid. | |
| 14 | ZF Coils with DuoPrime Wicking |
The Crystal Plus Pods by SKE are only compatible with the SKE Crystal Plus Closed Pod Kit. They all come pre-filled with 2ml of 20mg Nic Salt e-liquid which makes for an amazing vaping experience with fast nicotine delivery and amazing flavour production. Also, built into each pod is a 1.1Ω Mesh coil which lasts […]
Uwell Caliburn G2 Coils are compatible with a variety of Uwell Caliburn Pod Kits. check the table below for the full compatibility list. Available in two different resistances, both of which are great for MTL (Mouth To Lung) vaping. With an advanced mesh coil structure, Caliburn G2 Coils produce great flavour and a smooth throat […]
The Innokin Plex3D iSub Coils are compatible with the Innokin DV pod system kit and the iSub-B 2ml Tank. The Plex3D design contains “Micro-Grooves” and employs organic cotton and wood pulp wicking for improved flavor absorption from your e-liquid. It uses 3D Mesh Coil Technology. The Plex3D Coils have a recommended wattage range of 30 to 55W and include quick heat-up and cool-down times, which significantly increase coil life.
The 20A-40A rating indicates the maximum safe continuous discharge rate for the battery. It is important to use a battery that matches the requirements of your device to ensure safety and prolong the battery’s lifespan. As with all rechargeable batteries
Aspire Flexus AIO Pods are only compatible with the Flexus AIO Pod Kit. With a 2ml capacity which you replenish via the top-fill port, these pods are easy to use and maintain. Featuring convenient plug-and-play coil installation, even a first-time vaper will find it easy to replace the Aspire AF Coils. To refill the Flexus […]
The Flexus Q Pod Vape Kit is a kind of electronic cigarette that uses vape juice-filled pods rather than conventional tanks. The Flexus Q Pod Vape kit is a lightweight, portable gadget with an intuitive design. Â The pods normally come in a range of flavours and nicotine levels and are pre-filled with e-liquid.
Select at least 2 products
to compare
Reviews
There are no reviews yet.